Descriere
- Thermoplastic enclosure
- Double-insulated
- Compact design
- 90 mm x 84 mm x 30 mm
- Interlock with protection against incorrect locking.
- Long life
- High holding force
- 1 Cable entry M 20 x 1.5
- IDC method of termination
- Manual release
Caracteristici
| Active principle | electromechanical |
|---|---|
| Actuating speed, maximum | 2 |
| Ambient temperature, maximum | 60 |
| Ambient temperature, minimum | -25 |
| B10d Normally-closed contact (NC) | 2000000 |
| Basic quantity unit | Piece |
| Cable section, maximum | 1 x 1.0 mm², flexible |
| Cable section, minimum | 1 x 0.75 mm² |
| Certificates | CCC; cULus; EAC |
| Clamping force in accordance with ISO14119 | 1000 |
| Coding level according to ISO 14119 | Low |
| Current, Utilisation category AC-15 | 4 |
| Current, Utilisation category DC13 | 4 |
| EAN ( European Article Number) | 4030661056296 |
| EAN (European Article Number) | 4030661056296 |
| Electrical power consumption, maximum | 10 |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight | 272.000 |
| Height of sensor | 84 |
| Included in delivery | Actuators must be ordered separately. |
| Latching force | 30 |
| Length of sensor | 30 |
| Manual release | Yes |
| Material of the contacts, electrical | Silver |
| Max. fuse rating | 6 A gG D-fuse |
| Mechanical life, minimum | 1000000 |
| Mission Time | 20 |
| Net weight | 272.000 |
| Note (General) | This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules |
| Note (Manual release) | For manual release using M5 triangular key, available as accessory ; bottom |
| Note (Switching element) | Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges |
| Note (applications) | sliding safety guard; removable guard; hinged safety guard |
| Number of actuating directions | 2 |
| Number of safety contacts | 2 |
| Positive break force, minimum | 17 |
| Power to unlock | Yes |
| Product group | Initial |
| Product name | AZM 170 |
| Product type description | AZM 170-02ZRK 230 VAC |
| Rated control voltage | 230 |
| Rated impulse withstand voltage | 4 |
| Rated insulation voltage | 250 V |
| Required rated short-circuit current to EN 60947-5-1 | 1000 |
| Standards | ISO 13849-1 |
| Switching element | Opener (NC) |
| Switching principle | Creep circuit element |
| Terminal Connector | IDC method of termination |
| Thermal test current | 6 |
| Traceparts, external ID | 69-15022006-905849 |
| Traceparts, product ID | 33-22052019-077198 |
| Voltage, Utilisation category AC15 | 230 |
| Voltage, Utilisation category DC13 | 24 |
| Width of sensor | 90 |
| eCl@ss number, Version 9.0 | 27-27-26-03 |
| positive break travel | 11 |
electrical data
| switching frequency | 1000 |
|---|
Housing
| Weight | 272 |
|---|
ambient conditions
| protection class | IP 67 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
