MSP452-11/11Y-M20

Descriere

Metal enclosure
2 cable entries
4 Contacts
118 mm x 174 mm x 64 mm
2 cable entries

Caracteristici

Active principle	mechanical
Actuating element	Plunger
Actuating torque	0.20
Ambient temperature, maximum	90
Ambient temperature, minimum	-30
Basic quantity unit	Piece
Bounce duration, maximum	43221
Cable section, maximum	2.5 mm²
Cable section, minimum	1.5 mm²
Contact opening	2 x 0.5 mm
Diameter of the Plunger	10
EAN ( European Article Number)	4030661190815
EAN (European Article Number)	4030661190815
Enclosure coating material	painted
Enclosure material	Grey cast iron, galvanised
Gross weight	1735.000
Height of sensor	174
Length of sensor	64
Max. fuse rating	10 A gG D-fuse
Mechanical life, minimum	3000000
Net weight	1735.000
Note (Cable section)	All indications about the cable section are including the conductor ferrules.
Note (General)	This rotating spindle limit switch with snap-action insert is only fit for use in normal to average operating conditions, e.g. for machine tools, cranes and conveyors. Protection class IP 65 to IEC/EN 60529.; By reversing the contacts, the spindle revolutions can be set between 4 and 55 revolutions The run-out towards each side is at least 5 revolutions.
Number of openers	2
Number of shutters	1
Product group	Initial
Product name	MSP 452
Product type description	MSP 452-11/11Y
Rated impulse withstand voltage	4
Rated insulation voltage	250 V
Slide form	Curvature
Standards	EN 60947-5-1
Switching element	NO contact / NC contact
Switching principle	Snap switch element
Switchover time, maximum	10
Terminal Connector	Screw connection
Thermal test current	6
Utilisation category	AC-15
Utilisation category AC-15	230
Width of sensor	118
Wire cross-section	12
eCl@ss number, Version 9.0	27-27-26-01