Name: AZM300B-ST-AS-A
Brand: Schmersal

Descriere

Solenoid interlock with integrated AS-i Safety Interface
Universal repeatedly teachable or individual coding because of the RFID technology
I-variants with coding level HIGH to ISO 14119
Suitable for hinged and sliding guards
High protection class IP69K
2 integrated snap-in stages
Thermoplastic enclosure
Universal coding with RFID technology
Suitable for hinged and sliding guards
3 different directions of actuation
Actuator monitored
Power to lock
Magnet supply through the AS-Interface

Caracteristici

AS-i Current consumption, maximum	200
AS-i Device protection	Internal short-circuit proof
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Operating voltage AS-i maximum	31.6
AS-i Operating voltage, minimum	26.5
AS-i Outputs, DO 0	Solenoid control
AS-i Outputs, DO 1	No Function
AS-i Outputs, DO 2	No Function
AS-i Outputs, DO 3	No Function
AS-i Parameter bits, P0	Safety guard closed and can be locked
AS-i Parameter bits, P1	Solenoid interlock locked
AS-i Parameter bits, P2	Auxiliary voltage in
AS-i Parameter bits, P3	Internal device error (FID)
AS-i Profile	S-7.B.F.E
AS-i Specification	Safety-Slave
AS-i Version	V 3.0
Active principle	RFID
Actuator monitored	Yes
Ambient temperature, maximum	60
Basic quantity unit	Piece
Certificates	cULus; TÜV; ECOLAB; EAC; FCC; ASi-SaW
Clamping force	1150
Coding level according to ISO 14119	Low
Control category to EN13849	4
Degree of pollution to VDE 0100	3
Duration of risk, maximum	200
EAN (European Article Number)	4030661475028
Enclosure material	Glass-fibre, reinforced thermoplastic
Ensured switch distance "OFF"	20
Ensured switch distance "ON"	1
Gross weight	600.000
Height of sensor	102.6
Included in delivery	Actuators must be ordered separately.
Integral System Diagnostics, status	Yes
Latching	Yes
Latching force	25; 50
Length of sensor	34.4
Manual release	Yes
Mechanical life, minimum	1000000
Mission Time	20
Net weight	600.000
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) ; FID: periphery error
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Operating voltage)	Protection against polarity reversal
Note (LED switching conditions display)	(1) green/red LED (AS-i duo LED): Supply voltage/communication error/slave address = 0/periphery error detected/device error detected/manipulation protection active; (2) LED yellow: Device condition (Enabling status); (3) LED red: Internal device error
Note (Mechanical lifetime)	When using as door hinge: ≥ 50.000 operations (Türmassen ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Number of actuating directions	3
Overvoltage category	III
Overvoltage category to VDE 0100	3
PFD value	0.00007
PFH-value	0.0000000004
PIN 1	AS-Interface +
PIN 2	Aux - (P)
PIN 3	AS-Interface -
PIN 4	Aux + (P)
Performance level, up to	e
Power to lock	Yes
Product group	Initial
Product name	AZM 300-AS
Product type description	AZM300B-ST-AS-A
Protection class (Operating resource)	2
Protection rating	II
Rated impulse withstand voltage	0.8
Rated insulation voltage	32 VDC
Reaction time, maximum	120
Recommendation (actuator)	AZ/AZM300-B1
Resistance to vibrations to EN 60068-2-6	10 … 150 Hz, amplitude 0.35 mm
Restistance to shock	30 g / 11 ms
Safety Integrity Level (SIL), applicable for	3
Standards	IEC 61508
Storage and transport temperature, maximum	90
Storage and transport temperature, minimum	-10
Switch distance	2
Terminal Connector	Connector plug M12, 4-pole, (A-coding)
Time to readiness, maximum	5000
Width of sensor	87.4
eCl@ss number, Version 9.0	27-27-26-03
general information	Universal coding