103014764

Descriere

Safety sensor, electronic
Thermoplastic enclosure
Small body, high switching distance
Protection class IP65 / IP67
Repeated individual coding with RFID technology
Coding level „High” according to ISO 14119

Caracteristici

AS-i Current consumption, maximum	100
AS-i Device protection	Internal short-circuit proof
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Operating voltage AS-i maximum	31.6
AS-i Operating voltage, minimum	18
AS-i Outputs, DO 0 … DO 3	No Function
AS-i Parameter bits, P0	Actuator in
AS-i Parameter bits, P1	Enabling inhibit (tamper protection time) active (FID))
AS-i Parameter bits, P2	Enabling inhibit (tamper protection time) active (FID)
AS-i Parameter bits, P3	Internal device error (FID)
AS-i Profile	S-0.B.F.E
AS-i Specification	Safety-Slave
AS-i Version	V 2.1
AS-i, ID-Code	0xB
AS-i, ID-Code1	0xF
AS-i, ID-Code2	0xE
AS-i, IO-Code	0x0
Active principle	RFID
Ambient temperature, maximum	60
Ambient temperature, minimum	-25
Basic quantity unit	Piece
Certificates	cULus; TÜV; EAC; FCC; ASi-SaW
Coding	Yes
Coding level according to ISO 14119	High
Control category to EN13849	4
Degree of pollution to VDE 0100	3
Duration of risk, maximum	200
EAN (European Article Number)	4030661507620
Enclosure material	Thermoplastic hotmelt
Ensured switch distance "OFF" S<sub>ar</sub>, lateral	15
Ensured switching distance "OFF", front	18
Ensured switching distance "ON", front	10
Ensured switching distance "ON", side	6
Gross weight	83.000
Height of sensor	29.5
Hysteresis (Switch distance), maximum	2
Included in delivery	Actuators must be ordered separately.
Integral System Diagnostics, status	Yes
Length of cable	0.25
Length of sensor	18
Mission Time	20
Net weight	83.000
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) ; FID: periphery error
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Operating voltage)	Protection against polarity reversal
Note (LED switching conditions display)	(1) green/red LED (AS-i Duo LED):Supply voltage / communication error / slave address = 0 / periphery error detected / Tamper protection time active; (2) yellow LED: device condition (enabling status) / hysteresis signal / device error
Number of actuating directions	2
Overvoltage category	III
Overvoltage category to VDE 0100	3
PFD value	0.0000689
PFH-value	0.000000000393
PIN 1	AS-Interface +
PIN 2	n.c. (≤ 30 VDC)
PIN 3	AS-Interface -
PIN 4	n.c. (≤ 30 VDC)
Performance level, up to	e
Product group	Initial
Product name	RSS260 AS
Protection class (Operating resource)	3
Protection rating	III
Rated impulse withstand voltage	0.8
Rated insulation voltage	32 VDC
Reaction time, maximum	100
Recommendation (actuator)	RST260-1
Repeat accuracy R	0.5
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Safety Integrity Level (SIL), applicable for	3
Standards	IEC 61508
Storage and transport temperature, maximum	85
Storage and transport temperature, minimum	-25
Switch distance	12 mm; 9 mm (in case of approach from side)
Switching frequency, maximum	1
Terminal Connector	Connecting cable with M12 connector, straight, 4-pole
Time to readiness, maximum	2000
Width of sensor	40
eCl@ss number, Version 9.0	27-27-24-03
general information	Individual coding, multiple teaching