Descriere
- Encoder with solid shaft ø10 mm or ø6 mm
- Optical sensing method
- Max. 5000 pulses per revolution
- Clamping or synchro flange
- Industrial standard
- Small profile depth
Technical data - electrical ratings
| Voltage supply | 5 VDC ±10 % 10...30 VDC 4.5...30 VDC |
|---|---|
| Pulses per revolution | 10 … 5000 |
| Consumption typ. | 80 mA (5 VDC, w/o load) 60 mA (24 VDC, w/o load) 180 mA (4.5 VDC, w/o load) |
| Reference signal | Zero pulse, width 90° |
| Sensing method | Optical |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-3 |
| Output signals | A 90° B, N + inverted |
| Output frequency | ≤200 kHz (24K) ≤300 kHz (05A/25W) |
| Output stages | Antivalent Push-pull short-circuit proof Push-pull antiv. short-circuit proof |
| Approval | UL approval / E217823 |
Technical data - mechanical design
| Size (flange) | ø58 mm |
|---|---|
| Shaft type | ø6 mm solid shaft (synchro flange) |
| Flange | Synchro flange |
| Protection DIN EN 60529 | IP 42 IP 65 |
| Operating speed | ≤12000 rpm (IP 42) ≤6000 rpm (IP 65) |
| Admitted shaft load | ≤10 N axial ≤20 N radial |
| Material | Housing: steel Housing: aluminium (connection ‑A) Flange: aluminium |
| Operating torque typ. | 0,0023 Nm (IP 42) 0,026 Nm (IP 65) |
| Operating temperature | -20...+85 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 10-200 Hz DIN EN 60068-2-27 Shock 50 g, 11 ms |
| Weight approx. | 300 g |
| Connection | Connector M23, 12-pin Cable 2 m |
Output switch
Accesorii și produse asociate
- Female connector M23, 12-pin, straight, without cableConnectors and cables
- Mounting adaptor for encoders with synchro flange (Z 119.015)Mounting accessories
- Clamp set ø15 mmMounting accessories
