Caracteristici
| Active principle | mechanical |
|---|---|
| Actuating angle | 20 |
| Actuating element | Plunger |
| Actuating force | 35 |
| Actuating speed, maximum | 1 |
| Actuating speed, minimum | 1 |
| Ambient temperature, maximum | 90 |
| Ambient temperature, minimum | -30 |
| Basic quantity unit | Piece |
| Cable section, maximum | 2.5 mm² |
| Certificates | CCC; EAC |
| Contact opening | 2 x 2.5 mm |
| Diameter of the Plunger | 10 |
| EAN ( European Article Number) | 4030661002156 |
| EAN (European Article Number) | 4030661002156 |
| Enclosure coating material | painted |
| Enclosure material | Light-alloy diecast, paint finish |
| Gross weight | 425.000 |
| Height of sensor | 160 |
| Length of sensor | 43 |
| Material of the contacts, electrical | Silver |
| Max. fuse rating | 20 A gG D-fuse |
| Mechanical life, minimum | 5000000 |
| Net weight | 425.000 |
| Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
| Note (General) | Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch. |
| Note (Switching element) | with double break |
| Number of shutters | 3 |
| Product group | Initial |
| Product name | 016 telescopic plunger 2S |
| Product type description | T2S 016-30Y |
| Rated insulation voltage | 400 V |
| Slide form | Sphere |
| Standards | EN 60947-5-1 |
| Switching element | Normally open contact (NO) |
| Switching principle | Creep circuit element |
| Terminal Connector | Screw connection |
| Thermal test current | 10 |
| Utilisation category | AC-15 |
| Utilisation category AC-15 | 400 |
| Width of sensor | 67 |
| Wire cross-section | 13 |
| eCl@ss number, Version 9.0 | 27-27-06-01 |
Housing
| Weight | 425 |
|---|
ambient conditions
| protection class | IP 65 to IEC/EN 60529 |
|---|
