Name: AZ200CC-T-1P2P
Brand: Schmersal

Descriere

Thermoplastic enclosure
Max. length of the sensor chain 200 m
Self-monitoring series-wiring of 31 sensors
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Intelligent diagnosis
Spring pulley connection

Caracteristici

Absicherung des Sicherheitsausganges	short-circuit proof
Active principle	Non-contact
Actuating speed, maximum	0.2
Actuator monitored	Yes
Ambient temperature, maximum	70
Ambient temperature, minimum	-25
Available until	2020-12-31T00:00:00
Basic quantity unit	Piece
Cable section, maximum	1.5 mm²
Cable section, minimum	0.25 mm²
Certificates	cULus; TÜV; EAC
Control category to EN13849	4
Current leakage	0.5
Current, Utilisation category DC13	0.05
Degree of pollution to VDE 0100	3
Duration of risk, maximum	120
EAN ( European Article Number)	4030661318608
EAN (European Article Number)	4030661318608
EPLAN	Yes
Electrical fuse rating	short-circuit proof
Enclosure material	Glass-fibre, reinforced thermoplastic
Ensured switch distance "OFF"	30
Ensured switch distance "ON"	4
Fuse rating to UL 508, maximum	4
Gross weight	345.000
Height of sensor	220
Hysteresis (Switch distance), maximum	1.5
Included in delivery	Actuators must be ordered separately.
Integral System Diagnostics, status	Yes
Latching force	30
Length of sensor	50
Mechanical life, minimum	1000000
Mission Time	20
Net weight	345.000
No-load current	100
Note (Cable section)	All indications about the cable section are including the conductor ferrules.
Note (Delivery capacity)	Phased-out product
Note (LED switching conditions display)	Operating condition: LED green; Error / functional defect: LED red; Supply voltage: LED green
Note (Relative humidity)	non-condensing
Number of safety contacts	2
Operating Current	50
Overvoltage category	III
Overvoltage category to VDE 0100	3
PFH-value	0.000000004
Performance level, up to	e
Product group	Initial
Product name	AZ 200
Product type description	AZ 200CC-T-1P2P
Protection class (Operating resource)	2
Protection rating	II
Rated impulse withstand voltage	0.8
Rated insulation voltage	32 VDC
Rated operating current (safety outputs)	250
Rated operating voltage, maximum	26.4 VDC
Rated operating voltage, minimum	20.4 VDC
Reaction time, maximum	60
Recommendation (actuator)	AZ/AZM 200-B1
Relative humidity, maximum	95
Relative humidity, minimum	30
Repeat accuracy R	0.5
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Safety Integrity Level (SIL), applicable for	3
Series-wiring	Yes
Short circuit detection	Yes
Short-circuit recognition	Yes
Standards	IEC 61508
Storage and transport temperature, maximum	85
Storage and transport temperature, minimum	-25
Switch distance	6.5
Switching frequency, approx.	1
Switching thresholds of fail-safe inputs	−3 V … 5 V (Low); 15 V … 30 V (High)
Terminal Connector	Spring pulley connection
Time to readiness, maximum	4000
Traceparts	Yes
Traceparts, external ID	69-07062010-118823
Traceparts, product ID	33-22052019-077176
Versions	p-type
Voltage drop U<sub>d</sub>, maximum	4
Voltage, Utilisation category DC13	24
Width of sensor	40
Wire cross-section, maximum	15
Wire cross-section, minimum	23
eCl@ss number, Version 9.0	27-27-26-02