Name: AZ200ST-T-AS
Brand: Schmersal

Descriere

Safety switch with separate actuator
Thermoplastic enclosure
Integrated AS-Interface
40 mm x 220 mm x 50 mm
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Intelligent diagnosis
With door detection sensor T
Protection class IP67

Caracteristici

AS-i Device protection	Internal short-circuit proof
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Operating voltage AS-i maximum	31.6
AS-i Operating voltage, minimum	26.5
AS-i Outputs, DO 0 … DO 3	No Function
AS-i Parameter bits, P0	Safety guard and actuator detected
AS-i Parameter bits, P1	Safety release
AS-i Parameter bits, P2	Static 0
AS-i Parameter bits, P3	Error
AS-i Profile	S-0.B.F.E
AS-i Version	V 2.1
AS-i, ID-Code	0xB
AS-i, ID-Code1	0xF
AS-i, ID-Code2	0xE
AS-i, IO-Code	0x0
Active principle	Non-contact
Actuating speed, maximum	0.2
Actuator monitored	Yes
Ambient temperature, maximum	70
Ambient temperature, minimum	-25
Available until	2020-12-31T00:00:00
Basic quantity unit	Piece
Certificates	cULus; TÜV; EAC; ASi-SaW
Control category to EN13849	4
Degree of pollution to VDE 0100	3
Duration of risk, maximum	120
EAN ( European Article Number)	4030661356440
EAN (European Article Number)	4030661356440
Enclosure material	Glass-fibre, reinforced thermoplastic
Ensured switch distance "OFF"	30
Ensured switch distance "ON"	4
Gross weight	335.000
Height of sensor	220
Hysteresis (Switch distance), maximum	1.5
Included in delivery	Actuators must be ordered separately.
Integral System Diagnostics, status	Yes
Latching force	30
Length of sensor	50
Mechanical life, minimum	1000000
Mission Time	20
Net weight	335.000
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) ; FID: periphery error
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Operating voltage)	Protection against polarity reversal
Note (Delivery capacity)	Phased-out product
Note (LED switching conditions display)	(1) LED green-red (AS-i Duo LED): Supply voltage / Communication error / Slave address = 0; (2) LED red: Internal device error; (3) LED yellow: Device condition
Note (Relative humidity)	non-condensing
Operating Current	50
Overvoltage category	III
Overvoltage category to VDE 0100	3
PFH-value	0.000000004
PIN 1	AS-i +
PIN 2	n.c. (≤ 30 VDC)
PIN 3	AS-Interface -
PIN 4	n.c. (≤ 30 VDC)
Performance level, up to	e
Product group	Initial
Product name	AZ 200 AS
Product type description	AZ 200ST-T-AS
Protection class (Operating resource)	2
Protection rating	II
Rated impulse withstand voltage	0.8
Rated insulation voltage	32 VDC
Reaction time, maximum	60
Relative humidity, maximum	95
Relative humidity, minimum	30
Repeat accuracy R	0.5
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Safety Integrity Level (SIL), applicable for	3
Standards	IEC 61508; IEC 60947-5-3
Storage and transport temperature, maximum	85
Storage and transport temperature, minimum	-25
Switch distance	6.5
Terminal Connector	Connector plug M12, 4-pole, (A-coding)
Time to readiness, maximum	4000
Width of sensor	40
eCl@ss number, Version 9.0	27-27-06-02