Preț la cerere
Cod produs 103000234
Disponibilitate La cerere
Solicită produs| Active principle | electromechanical |
|---|---|
| Actuating radius, minimum | 150 |
| Actuating speed, maximum | 2 |
| Ambient temperature, maximum | 60 |
| Ambient temperature, minimum | -25 |
| B10d Normally open contact (NO) | 1000000 |
| B10d Normally-closed contact (NC) | 2000000 |
| Basic quantity unit | Piece |
| Cable section, maximum | 1 x 1.5 mm², flexible |
| Cable section, minimum | 1 x 0.25 mm² |
| Certificates | CCC; cULus; EAC |
| Clamping force | 2000 |
| Coding level according to ISO 14119 | High |
| Current, Utilisation category AC-15 | 4 |
| Current, Utilisation category DC13 | 2.5 |
| Delivery scope of Mounting material | Tamperproof screws |
| EAN (European Article Number) | 4030661420226 |
| Electrical power consumption, maximum | 10 |
| Emergency exit | Yes |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 515.000 |
| Height of sensor | 90 |
| Included in delivery | Slot sealing plugs |
| Latching force | 30 |
| Length of sensor | 30 |
| Manual release | Yes |
| Material of the contacts, electrical | Silver |
| Max. fuse rating | 6 A gG D-fuse to DIN EN 60269-1 |
| Mechanical life, minimum | 1000000 |
| Mission Time | 20 |
| Net weight | 515.000 |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
| Note (Emergency exit) | The emergency exit is used where an intervention in an already locked hazardous area is required; Emergency exit by pressing the red push button |
| Note (General) | The axis of the hinge must be 5 mm above and in a parallel plane to the top surface of the safety switch.; minimum actuating radius on hinged guards in line with the plane of the actuator 150 mm; minimum actuating radius on rotating guard systems via the narrow edge of the actuator 180 mm; The actuator is not available separately. |
| Note (Manual release) | For maintenance, installation, etc. ; For manual release using M5 triangular key, available as accessory ; Top-side (ordering suffix -ED) or rear-side (ordering suffix -EU) mounting possible |
| Note (applications) | sliding safety guard; removable guard; hinged safety guard |
| Number of actuating directions | 3 |
| Number of auxiliary contacts | 2 |
| Number of safety contacts | 4 |
| Positive break force, minimum | 20 |
| Power to unlock | Yes |
| Product group | Initial |
| Product name | AZM 161I |
| Product type description | AZM 161SK-12/12RITU-024-B1 |
| Rated control voltage | 24 |
| Rated impulse withstand voltage | 4 |
| Rated insulation voltage | 250 V |
| Required rated short-circuit current to EN 60947-5-1 | 1000 |
| Standards | ISO 13849-1 |
| Switching element | NO contact, NC contact |
| Switching principle | Creep circuit element |
| Terminal Connector | Screw terminals |
| Thermal test current | 6 |
| Voltage, Utilisation category AC15 | 230 |
| Voltage, Utilisation category DC13 | 24 |
| Width of sensor | 130 |
| eCl@ss number, Version 9.0 | 27-27-26-03 |
| general information | Individual coding |
| positive break travel | 10 |
| switching frequency | 1000 |
|---|
| Weight | 515 |
|---|
| protection class | IP 67 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
