Name: AZM 170 BZ ST-AS P
Brand: Schmersal

Descriere

Solenoid interlock
Integrated AS-Interface
Thermoplastic enclosure
90 mm x 84 mm x 30 mm
Double-insulated
High holding force
Combined monitoring of actuator and solenoid interlock

Caracteristici

AS-i Current consumption, maximum	100
AS-i Device protection	Internal short-circuit proof
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Operating voltage AS-i maximum	31.6
AS-i Operating voltage, minimum	26.5
AS-i Outputs, DO 0	Solenoid control
AS-i Outputs, DO 1	No Function
AS-i Outputs, DO 2	No Function
AS-i Outputs, DO 3	No Function
AS-i Parameter bits, P0	Safety guard and actuator detected
AS-i Parameter bits, P1	Solenoid interlock locked
AS-i Parameter bits, P2	No function
AS-i Parameter bits, P3	No function
AS-i Profile	S-7.B.F.E
AS-i Specification	Safety-Slave
AS-i Version	V 2.1
AS-i, ID-Code	0xB
AS-i, ID-Code1	0xF
AS-i, ID-Code2	0xE
AS-i, IO-Code	0x7
Active principle	electromechanical
Actuating speed, maximum	2
Actuator and interlock combined monitored	Yes
Ambient temperature, maximum	55
Ambient temperature, minimum	-25
Basic quantity unit	Piece
Certificates	cULus; TÜV; EAC; ASi-SaW
Clamping force	1000
Control category to EN13849	3
Degree of pollution to VDE 0100	3
EAN ( European Article Number)	4030661390451
EAN (European Article Number)	4030661390451
Enclosure material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Fuse rating	4
Gross weight	288.000
Height of sensor	75.5
Included in delivery	Actuators must be ordered separately.
Integral System Diagnostics, status	Yes
Latching force	5
Mechanical life, minimum	1000000
Mission Time	20
Net weight	288.000
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) ; FID: periphery error
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Operating voltage)	Protection against polarity reversal
Note (General)	Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.
Note (LED switching conditions display)	(1) LED green: Supply voltage; (3) LED yellow : Enabling status ; (2) red LED: Communication error / Slave address = 0
Note (PFH-value)	up to max. 100,000 switching cycles/year
Note (Relative humidity)	non-condensing; non-icing
Number of actuating directions	2
Operating Current	500
Overvoltage category	III
Overvoltage category to VDE 0100	3
PFH-value	0.000000101
PIN 1	AS-i +
PIN 2	Aux - (P)
PIN 3	AS-Interface -
PIN 4	Aux + (P)
Performance level, up to	d
Please note:	Einsetzbar wenn ein Fehlerausschluss für eine gefahrbringende Beschädigung der 1-kanaligen Mechanik zulässig ist und ein ausreichender Manipulationsschutz gewährleistet ist.
Power to unlock	Yes
Product group	Initial
Product name	AZM 170 AS
Product type description	AZM 170 BZ ST-AS P
Protection class (Operating resource)	2
Protection rating	II
Rated impulse withstand voltage	0.8
Rated insulation voltage	32 VDC
Rated operating voltage	24 VDC -15% / +10% (stabilised PELV)
Reaction time, maximum	100
Relative humidity, maximum	95
Relative humidity, minimum	30
Safety Integrity Level (SIL), applicable for	2
Standards	IEC 61508
Storage and transport temperature, maximum	85
Storage and transport temperature, minimum	-25
Terminal Connector	Connector plug M12, 4-pole, (A-coding)
Traceparts, external ID	69-15022006-905849
Traceparts, product ID	33-22052019-077198
Width of sensor	90
eCl@ss number, Version 9.0	27-27-26-03