| Absicherung des Diagnoseausganges | short-circuit proof, p-type |
|---|---|
| Active principle | inductive |
| Actuating speed, maximum | 0.2 |
| Actuator monitored | Yes |
| Ambient temperature, maximum | 60 |
| Ambient temperature, minimum | -25 |
| Available until | 2020-12-31T00:00:00 |
| Basic quantity unit | Piece |
| Cable section, maximum | 1.5 mm² |
| Cable section, minimum | 0.25 mm² |
| Certificates | cULus; TÜV; EAC |
| Clamping force in accordance with ISO14119 | 2000 |
| Clamping force, maximum | 2600 |
| Control category | 3 |
| Current leakage | 0.5 |
| Current, Utilisation category DC13 | 0.05 |
| Degree of pollution to VDE 0100 | 3 |
| Duration of risk, maximum | 120 |
| EAN ( European Article Number) | 4030661412917 |
| EAN (European Article Number) | 4030661412917 |
| EPLAN | Yes |
| Electrical fuse rating | short-circuit proof, p-type |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 600.000 |
| Guard locking monitored | Yes |
| Height of sensor | 220 |
| Included in delivery | Actuators must be ordered separately.; Triangular key for AZM 200 |
| Integral System Diagnostics, status | Yes |
| Latching force | 30 |
| Length of cable, maximum | 200 |
| Length of sensor | 50 |
| Manual release | Yes |
| Mechanical life, minimum | 1000000 |
| Mission Time | 20 |
| Net weight | 600.000 |
| No-load current | 500 |
| Note | Cable length and cable section alter the voltage drop depending on the output current |
| Note (Actuator monitored) | Safety outputs Y1, Y2 |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
| Note (Delivery capacity) | Phased-out product |
| Note (General) | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
| Note (Guard locking monitored) | Safety outputs Y3, Y4 |
| Note (LED switching conditions display) | Supply voltage UB: LED green; Operating condition: LED green; Error / functional defect: LED red |
| Note, Utilisation category DC13 | Gilt für die Ausgänge Y1 und Y2 |
| Number of safety contacts | 4 |
| Operating Current | 1200 |
| Operating current (diagnostic output) | 100 |
| Operating voltage, maximum | 26.4 |
| Operating voltage, minimum | 20.4 |
| Overvoltage category | III |
| Overvoltage category to VDE 0100 | 3 |
| PFH-value | 0.000000004 |
| Performance level, up to | d |
| Power to unlock | Yes |
| Product group | Initial |
| Product name | AZM 200D |
| Product type description | AZM 200D-ST2-T-1P2P2P |
| Protection class (Operating resource) | 2 |
| Protection rating | II |
| Rated impulse withstand voltage | 0.8 |
| Rated insulation voltage | 32 VDC |
| Reaction time, maximum | 60 |
| Recommendation (actuator) | AZ/AZM 200-B1 |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Safety Integrity Level (SIL), applicable for | 2 |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Standards | IEC 61508; IEC 60947-5-3 |
| Storage and transport temperature, maximum | 85 |
| Storage and transport temperature, minimum | -25 |
| Switching frequency, approx. | 1 |
| Switching thresholds of magnet inputs | -3 V … 5 V (Low); 15 V … 30 V (High) |
| Terminal Connector | Connector M12, 8-pole |
| Time to readiness, maximum | 4000 |
| Traceparts, external ID | 69-15022006-935635 |
| Traceparts, product ID | 33-31052019-091719 |
| Voltage drop U<sub>d</sub>, maximum | 4 |
| Voltage, Utilisation category DC13 | 24 |
| Width of sensor | 40 |
| Wire cross-section, maximum | 15 |
| Wire cross-section, minimum | 23 |
| eCl@ss number, Version 9.0 | 27-27-26-03 |
| Safety functions | Yes |
|---|
| Weight | 590 |
|---|
| protection class | IP 67 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
