Name: AZM200B-ST-T-AS-P
Brand: Schmersal

Descriere

Solenoid interlock
Thermoplastic enclosure
High holding force 2000
40 mm x 244 mm x 50 mm
Interlock with protection against incorrect locking.
Double-insulated
Long life
Integrated AS-Interface
Solenoid supply 24 VDC (Aux)
Actuator monitored

Caracteristici

AS-i Current consumption, maximum	100
AS-i Device protection	Internal short-circuit proof
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Operating voltage AS-i maximum	31.6
AS-i Operating voltage, minimum	26.5
AS-i Outputs, DO 0	Solenoid control
AS-i Outputs, DO 1	No Function
AS-i Outputs, DO 2	No Function
AS-i Outputs, DO 3	No Function
AS-i Parameter bits, P0	Safety guard and actuator detected
AS-i Parameter bits, P1	Solenoid interlock locked
AS-i Parameter bits, P2	Magnet voltage in tolerance range
AS-i Parameter bits, P3	Error
AS-i Profile	S-7.B.F.E
AS-i Specification	Safety-Slave
AS-i Version	V 2.1
AS-i, ID-Code	0xB
AS-i, ID-Code1	0xF
AS-i, ID-Code2	0xE
AS-i, IO-Code	0x7
Active principle	electromechanical
Actuating speed, maximum	2
Actuator monitored	Yes
Ambient temperature, maximum	60
Ambient temperature, minimum	-25
Available until	2020-12-31T00:00:00
Basic quantity unit	Piece
Certificates	cULus; TÜV; EAC; ASi-SaW
Clamping force	2000
Coding level according to ISO 14119	Low
Control category to EN13849	4
Degree of pollution to VDE 0100	3
Duration of risk, maximum	120
EAN ( European Article Number)	4030661359144
EAN (European Article Number)	4030661359144
Enclosure material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Fuse rating	4
Gross weight	522.000
Height of sensor	244
Included in delivery	Actuators must be ordered separately.
Integral System Diagnostics, status	Yes
Latching force	30
Length of sensor	50
Mechanical life, minimum	1000000
Mission Time	20
Net weight	522.000
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) ; FID: periphery error
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note (AS-i Operating voltage)	Protection against polarity reversal
Note (Delivery capacity)	Phased-out product
Note (General)	Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.
Note (LED switching conditions display)	(1) LED green-red (AS-i Duo LED): Supply voltage / Communication error / Slave address = 0; (2) LED red: Internal device error; (3) LED yellow: Device condition
Note (Relative humidity)	non-condensing
Note (applications)	sliding safety guard; removable guard; hinged safety guard
Number of actuating directions	1
Operating Current	500
Overvoltage category	III
Overvoltage category to VDE 0100	3
PFH-value	0.000000004
PIN 1	AS-i +
PIN 2	Aux - (P)
PIN 3	AS-Interface -
PIN 4	Aux + (P)
Performance level, up to	e
Power to unlock	Yes
Product group	Initial
Product name	AZM 200 AS
Product type description	AZM 200 B ST-T-AS P
Protection class (Operating resource)	2
Protection rating	II
Rated impulse withstand voltage	0.8
Rated insulation voltage	32 VDC
Rated operating voltage	24 VDC -15% / +10% (stabilised PELV)
Reaction time, maximum	60
Relative humidity, maximum	95
Relative humidity, minimum	30
Resistance to vibrations to EN 60068-2-6	10 Hz ... 150 Hz, amplitude 0.35 mm
Restistance to shock	30 g / 11 ms
Safety Integrity Level (SIL), applicable for	3
Standards	IEC 61508; IEC 60947-5-3
Storage and transport temperature, maximum	85
Storage and transport temperature, minimum	-25
Terminal Connector	Connector plug M12, 4-pole, (A-coding)
Tightening torque of the screw, maximum	1
Time to readiness, maximum	4000
Traceparts, external ID	69-15022006-935635
Traceparts, product ID	33-31052019-091719
Width of sensor	40
eCl@ss number, Version 9.0	27-27-26-03
general information	Universal coding