Name: AZM200ST1-T-SD2P
Brand: Schmersal

Descriere

Thermoplastic enclosure
Electronic contact-free, coded system
Max. length of the sensor chain 200 m
Self-monitoring series-wiring
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Intelligent diagnosis
Manual release
Guard locking monitored
Connector M23, 8+1-pole
serial diagnostic output

Caracteristici

Active principle	inductive
Actuating speed, maximum	0.2
Ambient temperature, maximum	60
Ambient temperature, minimum	-25
Available until	2020-12-31T00:00:00
Basic quantity unit	Piece
Certificates	cULus; TÜV; EAC
Clamping force in accordance with ISO14119	2000
Clamping force, maximum	2600
Control category	4
Current leakage	0.5
Current, Utilisation category DC13	0.05
Degree of pollution to VDE 0100	3
Duration of risk, maximum	120
EAN ( European Article Number)	4030661355566
EAN (European Article Number)	4030661355566
EPLAN	Yes
Electrical fuse rating	short-circuit proof, p-type
Electrical fuse rating, maximum	4
Enclosure material	Glass-fibre, reinforced thermoplastic
Gross weight	595.000
Guard locking monitored	Yes
Height of sensor	220
Included in delivery	Actuators must be ordered separately.; Triangular key for AZM 200
Integral System Diagnostics, status	Yes
Latching force	30
Length of sensor	50
Manual release	Yes
Mechanical life, minimum	1000000
Mission Time	20
Net weight	595.000
No-load current	600
Note (Delivery capacity)	Phased-out product
Note (General)	As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
Note (LED switching conditions display)	Supply voltage UB: LED green; Operating condition: LED green; Error / functional defect: LED red
Note (Relative humidity)	non-condensing
Number of Series-wiring of sensors	31
Number of safety contacts	2
Operating Current	1200
Operating voltage, maximum	26.4
Operating voltage, minimum	20.4
Overvoltage category	III
Overvoltage category to VDE 0100	3
PFD value	0.0001
PFH-value	0.000000004
PIN 1	A1 Supply voltage UB
PIN 2	X1 Safety input 1
PIN 3	A2 GND
PIN 4	Y1 Safety output 1
PIN 5	OUT serial diagnostic output
PIN 6	X2 Safety input 2
PIN 7	Y2 Safety output 2
PIN 8	IN serial diagnostic input
PIN 9	without function
Performance level, up to	e
Power to unlock	Yes
Product group	Initial
Product name	AZM 200
Product type description	AZM 200ST1-T-SD2P
Protection class (Operating resource)	2
Protection rating	II
Rated impulse withstand voltage	0.8
Rated insulation voltage	32 VDC
Rated operating current (safety outputs)	250
Reaction time, maximum	60
Recommendation (actuator)	AZ/AZM 200-B1
Relative humidity, maximum	95
Relative humidity, minimum	30
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Safety Integrity Level (SIL), applicable for	3
Serial diagnostics	Yes
Series-wiring	Yes
Short circuit detection	Yes
Short-circuit recognition	Yes
Standards	IEC 61508; IEC 60947-5-3
Storage and transport temperature, maximum	85
Storage and transport temperature, minimum	-25
Switching frequency, approx.	1
Switching thresholds of fail-safe inputs	−3 V … 5 V (Low); 15 V … 30 V (High)
Switching thresholds of magnet inputs	-3 V … 5 V (Low); 15 V … 30 V (High)
Terminal Connector	Connector M23, 8+1-pole
Time to readiness, maximum	4000
Traceparts, external ID	69-15022006-935635
Traceparts, product ID	33-31052019-091719
Voltage drop U<sub>d</sub>, maximum	4
Voltage, Utilisation category DC13	24
Width of sensor	40
eCl@ss number, Version 9.0	27-27-26-03