Descriere
- High resolution programmable encoder
- Optical sensing method
- Max. 320000 pulses per revolution
- Programmable via BISS
- Small profile depth
- Blind or through hollow shaft ø12 mm
Technical data - electrical ratings
| Voltage supply | 5 VDC ±10 % 10...30 VDC |
|---|---|
| Pulses per revolution | 4096 … 320000 |
| Consumption typ. | 60 mA (5 VDC, w/o load) 40 mA (24 VDC, w/o load) |
| Reference signal | Zero pulse, programmable |
| Sensing method | Optical |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-3 |
| Output signals | A 90° B, N + inverted |
| Output frequency | ≤1300 kHz |
| Output stages | Antivalent Push-pull short-circuit proof |
| Approval | UL approval / E217823 |
Technical data - mechanical design
| Size (flange) | ø58 mm |
|---|---|
| Shaft type | ø12 mm (blind hollow shaft) |
| Protection DIN EN 60529 | IP 65 IP 42 |
| Operating speed | ≤3000 rpm (pulse disc 5000) ≤6000 rpm (pulse disc 2048) |
| Material | Housing: aluminium Flange: aluminium |
| Operating torque typ. | 0,009 Nm (IP 42) 0,037 Nm (IP 65) |
| Operating temperature | -20...+85 °C |
| Relative humidity | 95 % non-condensing |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 10-200 Hz DIN EN 60068-2-27 Shock 50 g, 11 ms |
| Weight approx. | 300 g |
| Connection | Connector M23, 12-pin Cable 2 m |
Data sheet
Output switch
Software
Accesorii și produse asociate
- Set of programming toolsProgramming accessories
- Solid shaft reducer 12/8 mmMounting accessories
- Female connector M23, 12-pin, straight, without cableConnectors and cables
- Solid shaft reducer 12/10 mmMounting accessories
- Torque springMounting accessories
- Torque pinMounting accessories
- Clamp set ø15 mmMounting accessories
- Set of spring plate for encoders ø58 mmMounting accessories
- Solid shaft reducer 12/6 mmMounting accessories
