BN 120-10Z

Descriere

Non-contact principle
Long life
Thermoplastic enclosure
Actuating distance up to 60 mm depending on actuating magnet and version
Design Ø 10.7 mm
with central mounting
With pre-wired cable
Actuation from side
with bias magnet

Caracteristici

Active principle	Magnetic drive
Actuating element	Magnet
Actuating panels	lateral
Actuating speed, maximum	18
Ambient temperature, maximum	70
Ambient temperature, minimum	-25
Basic quantity unit	Piece
Bounce duration, maximum	0.15
Diameter of sensor	10.7
EAN ( European Article Number)	4030661335407
EAN (European Article Number)	4030661335407
Enclosure material	Glass-fibre, reinforced thermoplastic
Gross weight	30.000
Housing construction form	Cylinder, thread
Included in delivery	Actuators must be ordered separately.
Length of cable	1
Length of sensor	71
Material of the Cable mantle	LiYY
Mechanical life, minimum	10000000
Mounting	central with threated flange M12 x 1
Net weight	30.000
Note (General)	The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.; When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.; The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.
Notice (Switch distance Sn)	Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Number of cable wires with indication of cable cross-section	2
Number of shutters	1
Product group	Initial
Product name	BN 120
Product type description	BN 120-10Z
Recommendation (actuator)	BP 10; 2x BP 10; BP 15; 2x BP 15; 2x BP 15/2; BP 34; BP 20; BP 31; BP 11; BP 12; BP 21
Recommendation (actuator, lift switchgear)	2 x BP 15/2; BP 10; 2 x BP 15; BP 15; 2 x BP 10; BP 34
Repeat accuracy R	0.25
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Suitable for elevators	Yes
Switch distance	5 mm … 50 mm; BP 10 = 5 mm; 2 x BP 10 = 17 mm; BP 15 = 6 mm; 2 x BP 15 = 17 mm; 2 x BP 15/2 = 17 mm; BP 34 = 15 ... 20 mm; BP 20 = 20 mm; BP 31 = 20 mm; BP 11 = 20 mm; BP 12 = 10 ... 30 mm; BP 21 = 25 ... 50 mm
Switching capacity, maximum	30
Switching current, maximum	1
Switching element	Normally open contact (NO)
Switching frequency, maximum	300
Switching voltage, maximum	200
Terminal Connector	Cable
Tightening torque of nuts, maximum	0.90
Versions	Reed contacts
Wire cross-section	0.25
bias magnet	Yes
eCl@ss number, Version 9.0	27-27-01-05