| Active principle | Magnetic drive |
|---|---|
| Actuating element | Magnet |
| Actuating panels | lateral |
| Actuating speed, maximum | 18 |
| Ambient temperature, maximum | 75 |
| Ambient temperature, minimum | -25 |
| Basic quantity unit | Piece |
| Bounce duration, maximum | 0.6 |
| Bounce duration, minimum | 0.3 |
| Certificates | cULus |
| EAN ( European Article Number) | 4030661059426 |
| EAN (European Article Number) | 4030661059426 |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 65.000 |
| Height of sensor | 25 |
| Housing construction form | rectangular |
| Included in delivery | Actuators must be ordered separately. |
| Latching | Yes |
| Length of cable | 1 |
| Length of sensor | 13 |
| Material of the Cable mantle | H03VV-F |
| Mechanical life, minimum | 1000000000 |
| Mounting | Enclosure with mounting slots |
| Net weight | 65.000 |
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.; When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.; The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. |
| Notice (Switch distance Sn) | Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
| Number of cable wires with indication of cable cross-section | 2 |
| Number of snap-in contacts | 1 |
| Product group | Initial |
| Product name | BN 310 |
| Product type description | BN 310-RZ |
| Recommendation (actuator) | BP 10 S; 2x BP 10 S; BP 15 S; BP 34 S; BP 20 S; BP 31 S; BP 11 S; 2x BP 11 S; BP 12 S; BP 21 S; 2x BP 21 S; BP 10 N; 2x BP 10 N; BP 15 N; 2 x BP 15/2 N; 2x BP 15/2 S; BP 34 N; BP 20 N; BP 31 N; BP 11 N; 2x BP 11 N; BP 12 N; 2x BP 12 N; 2x BP 12 S; BP 21 N; 2x BP 21 N; BE 20 N(S) ST 24VDC; BE 20 N(S) 48VDC |
| Recommendation (actuator, lift switchgear) | 2 x BP 15/2; BP 10; 2 x BP 15; BP 15; 2 x BP 10; BP 34 |
| Repeat accuracy R | 0.25 |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Suitable for elevators | Yes |
| Switch distance | BP 10N = 15 mm; BP 10S = 15 mm; 2 x BP 10N = 20 mm; 2 x BP 10S = 20 mm; BP 15N = 17 mm; BP 15S = 17 mm; 2 x BP 15/2N = 22 mm; 2 x BP 15/2S = 22 mm; BP 34S = 15 ... 30 mm; BP 11N = 15 mm; BP 11S = 15 mm; BP 12N = 20 mm; BP 12S = 20 mm; 2 x BP 12N = 10 ... 30 mm; 2 x BP 12S = 10 ... 30 mm; BP 21N = 15 ... 45 mm; BP 21S = 15 ... 45 mm; 2 x BP 21N = 20 ... 60 mm; 2 x BP 21S = 20 ... 60 mm; BE 20N = 20 mm; BE 20S = 20 mm; 5 mm … 60 mm; BP 34N = 15 ... 30 mm; BP 20N = 3 ... 25 mm; BP 20S = 3 ... 25 mm; BP 31N = 3 ... 25 mm; BP 31S = 3 ... 25 mm; 2 x BP 11N = 3 ... 25 mm; 2 x BP 11S = 3 ... 25 mm |
| Switching capacity, maximum | 120 |
| Switching current, maximum | 3 |
| Switching element | bistable contact |
| Switching frequency, maximum | 300 |
| Switching voltage, maximum | 250 |
| Terminal Connector | Cable |
| Versions | Reed contacts |
| Width of sensor | 88 |
| Wire cross-section | 0.75 |
| eCl@ss number, Version 9.0 | 27-27-01-05 |
| Weight | 65 |
|---|
| protection class | IP 67 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
