BN325-R

Descriere

Non-contact principle
1 Reed contakts
Long life
Actuating surface and direction of actuation marked by switch symbol
85 mm x 26 mm x 24 mm
Thermoplastic enclosure
Spade connector
Flat plug-in connector and 1 shielding plate
Actuation from front

Caracteristici

Active principle	Magnetic drive
Actuating element	Magnet
Actuating panels	front side
Actuating speed, maximum	18
Ambient temperature, maximum	70
Ambient temperature, minimum	-25
Basic quantity unit	Piece
Bounce duration, maximum	0.6
Bounce duration, minimum	0.3
EAN ( European Article Number)	4030661140933
EAN (European Article Number)	4030661140933
Enclosure material	Glass-fibre, reinforced thermoplastic
Gross weight	35.000
Height of sensor	26
Housing construction form	rectangular
Included in delivery	Actuators must be ordered separately.
Latching	Yes
Length of sensor	24
Mechanical life, minimum	1000000000
Mounting	rear with 2 threaded bolts
Net weight	35.000
Note (General)	The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
Notice (Switch distance Sn)	Actuating distance up to 55 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Number of snap-in contacts	1
Product group	Initial
Product name	BN 325
Product type description	BN 325-R
Recommendation (actuator)	BP 10 S; 2x BP 10 S; BP 15 S; BP 34 S; BP 20 S; BP 31 S; BP 11 S; 2x BP 11 S; BP 12 S; BP 21 S; 2x BP 21 S; BP 10 N; 2x BP 10 N; BP 15 N; 2 x BP 15/2 N; 2x BP 15/2 S; BP 34 N; BP 20 N; BP 31 N; BP 11 N; 2x BP 11 N; BP 12 N; 2x BP 12 N; 2x BP 12 S; BP 21 N; 2x BP 21 N; BE 20; BE 20 N(S) ST 24VDC; BE 20 N(S) 48VDC
Recommendation (actuator, lift switchgear)	2 x BP 15/2; BP 10; BP 15; 2 x BP 10; BP 34
Repeat accuracy R	0.25
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	50 g / 11 ms
Suitable for elevators	Yes
Switch distance	5 mm … 55 mm; 2 x BP 21S = 20 ... 55 mm; BP 34S = 10 ... 25 mm; BE 20 = 20 mm; BP 10N = 10 mm; BP 10S = 10 mm; 2 x BP 10N = 15 mm; 2 x BP 10S = 15 mm; BP 15N = 12 mm; BP 15S = 12 mm; 2 x BP 15/2N = 17 mm; 2 x BP 15/2S = 17mm; BP 34N = 10 ... 25mm; BP 20N = 5 ... 20 mm; BP 20S = 5 ... 20 mm; BP 31N = 5 ... 20 mm; BP 31S = 5 ... 20 mm; BP 11N = 10 mm; BP 11S = 10 mm; 2 x BP 11N = 20 mm; 2 x BP 11S = 20 mm; BP 12N = 15 mm; BP 12S = 15 mm; 2 x BP 12N = 10 ... 25 mm; 2 x BP 12S = 10 ... 25 mm; BP 21N = 15 ... 40 mm; BP 21S = 15 ... 40 mm; 2 x BP 21N = 20 ... 55 mm; BE 20N = 15 mm; BE 20S = 15 mm
Switching capacity, maximum	120
Switching current, maximum	3
Switching element	bistable contact
Switching frequency, maximum	300
Switching voltage, maximum	250
Terminal Connector	Flat plug-in connector 4.8 mm and 1 Shielding plate
Versions	Reed contacts
Width of sensor	85
eCl@ss number, Version 9.0	27-27-01-05