| Active principle | Magnetic drive |
|---|---|
| Actuating element | Magnet |
| Actuating panels | front side |
| Actuating speed, maximum | 18 |
| Ambient temperature, maximum | 75 |
| Ambient temperature, minimum | -25 |
| Basic quantity unit | Piece |
| Bounce duration, maximum | 0.6 |
| Bounce duration, minimum | 0.3 |
| Certificates | cULus |
| Diameter of sensor | 13 |
| EAN ( European Article Number) | 4030661009933 |
| EAN (European Article Number) | 4030661009933 |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 70.000 |
| Housing construction form | Cylinder smooth |
| Included in delivery | Actuators must be ordered separately. |
| Latching | Yes |
| Length of cable | 1 |
| Length of sensor | 103 |
| Material of the Cable mantle | H03VV-F |
| Mechanical life, minimum | 1000000000 |
| Mounting | central with threated flange |
| Net weight | 70.000 |
| Note (General) | The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. |
| Notice (Switch distance Sn) | Actuating distance up to 45 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
| Number of cable wires with indication of cable cross-section | 2 |
| Number of snap-in contacts | 1 |
| Product group | Initial |
| Product name | BN 65 |
| Product type description | BN 65-RZ/V |
| Recommendation (actuator) | 2x BP 10; BP 34; BP 20; BP 31; BP 11; BP 12; BP 21; BP 22 S; BP 22 N; BE 20 |
| Recommendation (actuator, lift switchgear) | BP 10; BP 15; 2 x BP 10; BP 34 |
| Repeat accuracy R | 0.25 |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Resistant to vibration | 15 g, on sine wave oscillation |
| Restistance to shock | 15 g, on sine wave oscillation |
| Suitable for elevators | Yes |
| Switch distance | 3 mm … 45 mm; 2 x BP 10 = 3 mm; BP 34 = 15 mm; BP 20 = 10 mm; BP 31 = 10 mm; BP 11 = 15 mm; BP 12 = 20 mm; BP 21 = 45 mm; BP 22 N = 35 mm; BP 22 S = 35 mm; BE 20 = 10 mm |
| Switching capacity, maximum | 120 |
| Switching current, maximum | 3 |
| Switching element | bistable contact |
| Switching frequency, maximum | 300 |
| Switching voltage, maximum | 250 |
| Terminal Connector | Cable |
| Tightening torque of nuts, maximum | 3 |
| Versions | Reed contacts |
| Wire cross-section | 0.75 |
| bias magnet | Yes |
| eCl@ss number, Version 9.0 | 27-27-01-05 |
| width across flats | 22 |
| switching frequency | 720000 |
|---|
| Weight | 70 |
|---|
| protection class | IP 67 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
