BN650-01Z/V

Descriere

Non-contact principle
Long life
Construction form Ø 13 mm
Thermoplastic enclosure
Actuating distance up to 60 mm depending on actuating magnet and version
with central mounting
With pre-wired cable
Actuation from front
with bias magnet

Caracteristici

Active principle	Magnetic drive
Actuating element	Magnet
Actuating panels	front side
Actuating speed, maximum	18
Ambient temperature, maximum	70
Ambient temperature, minimum	-25
Basic quantity unit	Piece
Bounce duration, maximum	0.15
Diameter of sensor	13
EAN ( European Article Number)	4030661335711
EAN (European Article Number)	4030661335711
Enclosure material	Glass-fibre, reinforced thermoplastic
Gross weight	65.000
Housing construction form	Cylinder smooth
Included in delivery	Actuators must be ordered separately.
Length of cable	1
Length of sensor	103
Material of the Cable mantle	LiYY
Mechanical life, minimum	100000000
Mounting	central with threated flange
Net weight	65.000
Note (General)	The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.; When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).; This does not apply to the bistable contact.
Notice (Switch distance Sn)	Actuating distance up to 55 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Number of cable wires with indication of cable cross-section	2
Number of openers	1
Product group	Initial
Product name	BN 650
Product type description	BN 650-01Z/V
Recommendation (actuator)	BP 10 S; 2x BP 10 S; BP 15 S; BP 34 S; BP 20 S; BP 31 S; BP 11 S; 2x BP 11 S; BP 12 S; 2x BP 12S; BP 21 S; 2x BP 21 S; BP 22 S; 2x BP 22 S; BE 20 S
Recommendation (actuator, lift switchgear)	BP 10; BP 15; 2 x BP 10; BP 34
Repeat accuracy R	0.25
Resistance to vibrations to EN 60068-2-6	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Suitable for elevators	Yes
Switch distance	5 mm … 55 mm; BP 10S = 5 mm; 2 x BP 10S = 10 mm; BP 15S = 6 mm; BP 34S = 20 mm; BP 20S = 15 mm; BP 31S = 15 mm; BP 11S = 5 mm; 2 x BP 11S = 15 mm; BP 12S = 10 mm; 2 x BP 12S = 25 mm; BP 21S = 30 mm; 2 x BP 21S = 20 ... 55 mm; BP 22S = 25 mm; 2 x BP 22S = 15 ... 55 mm; BE 20 S = 6 mm
Switching capacity, maximum	30
Switching current, maximum	1
Switching element	Opener (NC)
Switching frequency, maximum	300
Switching voltage, maximum	200
Terminal Connector	Cable
Versions	Reed contacts
Wire cross-section	0.25
bias magnet	Yes
eCl@ss number, Version 9.0	27-27-01-05