| Active principle | Magnetic drive |
|---|---|
| Actuating element | Magnet |
| Actuating panels | front side |
| Actuating speed, maximum | 18 |
| Ambient temperature, maximum | 75 |
| Basic quantity unit | Piece |
| Bounce duration, maximum | 0.2 |
| EAN ( European Article Number) | 4030661023472 |
| EAN (European Article Number) | 4030661023472 |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 40.000 |
| Height of sensor | 35 |
| Housing construction form | Block |
| Included in delivery | Actuators must be ordered separately. |
| Latching | Yes |
| Length of cable | 1 |
| Length of sensor | 16.5 |
| Material of the Cable mantle | LiY |
| Mechanical life, minimum | 1000000000 |
| Mounting | clamping foot and 2 single wires |
| Net weight | 40.000 |
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. |
| Notice (Switch distance Sn) | Actuating distance up to 40 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
| Number of cable wires with indication of cable cross-section | 2 |
| Number of snap-in contacts | 1 |
| Product group | Initial |
| Product name | BN 85 |
| Product type description | BN 85-R |
| Recommendation (actuator) | BP 10 S; 2x BP 10 S; BP 15 S; BP 34 S; BP 20 S; BP 31 S; BP 11 S; BP 12 S; BP 6 S; BP 8 S; 2 x BP 15 S |
| Recommendation (actuator, lift switchgear) | BP 10; BP 6; 2 x BP 15; BP 15; 2 x BP 10; BP 34 |
| Restistance to shock | 60 g, on sine wave oscillation |
| Suitable for elevators | Yes |
| Switch distance | 2 mm … 40 mm; BP 6S = 2 … 12 mm; BP 8S = 2 … 10 mm; BP 10S = 5 … 20 mm; 2 x BP 10S = 6 … 27 mm; BP 15S = 5 … 22 mm; 2 x BP 15S = 7 … 28 mm; BP 34S = 10 … 40 mm; BP 20S = 3 ... 28 mm; BP 31S = 4 ... 30 mm; BP 11S = 4 ... 23 mm; BP 12S = 5 ... 27 mm |
| Switching capacity, maximum | 30 |
| Switching current, maximum | 1 |
| Switching element | bistable contact |
| Switching voltage, maximum | 60 |
| Terminal Connector | Cable |
| Versions | Reed contacts |
| Width of sensor | 40 |
| Wire cross-section | 0.75 |
| eCl@ss number, Version 9.0 | 27-27-01-05 |
| Weight | 40 |
|---|
| protection class | IP 40 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
