Descriere
- Ex-Zone 2 and 22
- Thermoplastic enclosure
- Ø M12
- Particularly large switching distance
- Insensitive to transverse misalignment
- Suitable for food processing industry only in combination with BP 15 SS
- no mechanical wear
Caracteristici
| <p>Manufacturer declaration</p> | ATEX Zone 2 and 22 |
|---|---|
| Active area | front side |
| Actuating element | Magnet |
| Actuator switch distance | Actuating magnet BP 8, Sao: 10 mm; Actuating magnet BP 15 SS, Sao: 20 mm; Actuating magnet BP 10, Sao: 20 mm; Actuating magnet BP 6, Sao: 10 mm; Actuating magnet BP 8, Sar: 22 mm; Actuating magnet BP 15 SS, Sar: 32 mm; Actuating magnet BP 10, Sar: 32 mm |
| Ambient temperature, maximum | 70 |
| Ambient temperature, minimum | -25 |
| B10d- Value Normally-closed contact/Normally open contact (NC/NO | 25000000 |
| Basic quantity unit | Piece |
| Coding | None |
| Direction of motion | Head-on to the active surface |
| EAN ( European Article Number) | 4030661358567 |
| EAN (European Article Number) | 4030661358567 |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Ensured switch distance "OFF" | 22; 32 |
| Ensured switch distance "ON" | 10; 20 |
| Explosion protection category | 3D; 3G |
| Explosion protection designation | <span class="symbol">D</span> II 3D Ex tc IIIC T80°C Dc X; <span class="symbol">D</span> II 3G Ex nC IIC T6 Gc X |
| Explosion protection zones | 22; 2 |
| Explosion protection: regulations | EN 60079-0; EN 60079-31 |
| Gross weight | 360.000 |
| Housing construction form | Cylinder, thread |
| ISO thread of the sensor | M12 |
| Impact energy, maximum | 2 |
| Included in delivery | Actuators must be ordered separately. |
| Installation conditions (mechanical) | quasi-flush |
| Length of cable | 10 |
| Length of sensor | 38.5 |
| Material of the Cable mantle | PVC |
| Mission Time | 20 |
| Net weight | 360.000 |
| Note (General) | Contact symbols shown for the closed condition of the guard device.; The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN 1088) |
| Number of cable wires with indication of cable cross-section | 4 |
| Number of openers | 1 |
| Number of safety contacts | 2 |
| Number of shutters | 1 |
| Product group | Initial |
| Product name | EX-BNS 120 |
| Product type description | EX-BNS 120-11Z-3G/D 10.0M |
| Recommendation (actuator) | BP 10; BP 8; BP 6; BP 15 SS |
| Recommended safety switchgear | SRB-E-301ST; SRB-E-201LC |
| Resistance to vibrations to EN 60068-2-6 | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Short circuit detection | Yes |
| Short-circuit recognition | Yes |
| Standards | ISO 13849-1 |
| Storage and transport temperature, maximum | 70 |
| Storage and transport temperature, minimum | -25 |
| Switching capacity, maximum | 5 |
| Switching current, maximum | 0.25 |
| Switching frequency, maximum | 5 |
| Switching voltage, maximum | 100 |
| Terminal Connector | Cable |
| Traceparts, external ID | 69-15022006-928982 |
| Traceparts, product ID | 33-22052019-077534 |
| Voltage type | AC (alternating current); DC (direct current) |
| Wire cross-section | 0.25 |
| eCl@ss number, Version 9.0 | 27-27-24-02 |
Housing
| Weight | 360 |
|---|
ambient conditions
| protection class | IP67 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
