Descriere
- Encoder singleturn / SSI
- Optical sensing method
- Resolution: 14 bit
- Clamping flange
- Electronic setting of zero point
- Available with additional incremental output
Technical data - electrical ratings
| Voltage supply | 10...30 VDC 5 VDC ±10 % (on request) |
|---|---|
| Consumption w/o load | ≤50 mA (24 VDC) |
| Reverse polarity protection | Yes (10..30 VDC) / No (5 VDC) |
| Initializing time typ. | 20 ms after power on |
| Interface | SSI Incremental A 90° B (optional) |
| Function | Singleturn |
| Absolute accuracy | ±0,025 ° |
| Sensing method | Optical |
| Code | Gray or binary |
| Interference immunity | DIN EN 61000-6-2 |
| Steps per revolution | ≤16384 / 14 bit |
| Emitted interference | DIN EN 61000-6-4 |
| Incremental output | 2048 pulses A90°B + inverted |
| Inputs | SSI clock Control signals UP/DOWN inv. and zero |
| Code sequence | CW/CCW coded by connection |
| Diagnostic function | Self-diagnosis |
| Output stages | SSI data: Linedriver RS422 Diagnostic outputs push-pull Incremental: push-pull or linedriver RS422 |
| Approval | UL approval / E63076 |
Technical data - mechanical design
| Size (flange) | ø58 mm |
|---|---|
| Shaft type | ø10 mm solid shaft |
| Flange | Clamping flange |
| Protection DIN EN 60529 | IP 54 (without shaft seal) IP 65 (with shaft seal) |
| Operating speed | ≤10000 rpm (mechanical) ≤6000 rpm (electric) |
| Starting torque | ≤0,015 Nm (+25 °C, IP 54) ≤0,03 Nm (+25 °C, IP 65) |
| Admitted shaft load | ≤20 N axial ≤40 N radial |
| Material | Housing: aluminium Flange: aluminium |
| Operating temperature | -25...+85 °C -40...+85 °C (optional) |
| Rotor moment of inertia | 14,5 gcm² |
| Relative humidity | 95 % non-condensing |
| Resistance | DIN EN 60068-2-6 Vibration ±0.75 mm - 10-58 Hz 10 g - 58-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms |
| Weight approx. | 250 g |
| Connection | Connector M23, 12-pin Connector M12, 8-pin Cable 1 m |
3D CAD
Certificates / approvals
Accesorii și produse asociate
- Connection cable 10 m shielded with female connector M12, 8-pin, straight (ESG 34FH1000G)Connectors and cables
- Female connector M23, 12-pin, 8 m (incr.) (Z 182.M08)Connectors and cables
- Female connector M23, 12-pin, 2 m (incr.) (Z 182.003)Connectors and cables
- Female connector M23, 12-pin, 10 m (incr.) (Z 182.007)Connectors and cables
- Female connector M23, 12-pin, 5 m (incr.) (Z 182.005)Connectors and cables
- Female connector M23, 12-pin, without cable (incr.) (Z 182.001)Connectors and cables
- Female connector M23, 12-pin, 15 m cable (Z 130.M15)Connectors and cables
- Female connector M23, 12-pin, 10 m cable (Z 130.007)Connectors and cables
- Female connector M23, 12-pin, 15 m (incr.) (Z 182.M15)Connectors and cables
- Mounting adaptor for encoders with clamping flange (M3) (Z 119.017)Mounting accessories
- Eccentric fixing, single (Z 119.006)Mounting accessories
- Female connector M23, 12-pin, 5 m cable (Z 130.005)Connectors and cables
- Female connector M23, 12-pin, 3 m cable (Z 130.004)Connectors and cables
- Spring washer coupling D1=6 / D2=10 (Z 121.C01)Mounting accessories
- Female connector M23, 12-pin, 2 m cable (Z 130.003)Connectors and cables
- Adaptor plate for clamping flange, mounting by eccentric fixings (order separately) (Z 119.025)Mounting accessories
- Female connector M23, 12-pin, without cable (Z 130.001)Connectors and cables
- Connection cable 2 m shielded with female connector M12, 8-pin, straight (ESG 34FH0200G)Connectors and cables
- Adaptor plate for clamping flange for modification into synchro flange (Z 119.013)Mounting accessories
