| Voltage supply | 4.75...30 VDC |
|---|---|
| Consumption w/o load | ≤50 mA (24 VDC) ≤180 mA (5 VDC) + output load, max. 250 mA |
| Reverse polarity protection | Yes |
| Pulses per revolution | 1 … 8192 |
| Sensing method | Optical |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-3 |
| Output signals | A, B, Z A, B, Z + complement, ½ cycle index gated with negative B channel |
| Programmable parameters | Output resolution in increments of one (can be different for A and B) Output level TTL/HTL Zero pulse width and position Rotational direction CW/CCW |
| Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Output stages | Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof Push-pull (HTL, 7272) Vout = Vin, short-circuit proof |
| Approval | UL approval / file no. E240061 RoHS compliant EU guideline 2011/65/EC CE |
| Size (flange) | ø3.15" (ø80 mm) |
|---|---|
| Shaft type | ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated) |
| Bore runout | 0.0016" (0.04 mm) TIR max. |
| Protection DIN EN 60529 | IP 54 IP 65 IP 67 |
| Admitted misalignment | 0.004" (0.1016 mm) radial TIR (end of shaft) 0.01" (0.254 mm) axial |
| Operating speed | ≤5000 rpm (see temperature diagram) |
| Starting torque | ≤3 in-oz (77 °F, IP 65) ≤0,02 Nm (+25 °C, IP 65) |
| Bearing | 52100 SAE high carbon steel (ABEC 5) |
| Material | Housing: aluminium, powder-coated Shaft: stainless steel |
| Operating temperature | -40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram |
| Rotor moment of inertia | 2,3 oz-in² (420 gcm²) |
| Service life | Bearing: typ. 13 billion rev. (89000 h/2500 rpm) |
| Relative humidity | 98 % non-condensing |
| Resistance | DIN EN 60068-2-6 Vibration 20 g, 60-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms |
| Weight approx. | 23 oz. 660 g |
| Connection | MIL-connector, 7-pin MIL-connector, 10-pin Cable (AWG26 wire) |
