| AS-i Current consumption, maximum | 100 |
|---|---|
| AS-i Device protection | Internal short-circuit proof |
| AS-i Input, Channel 1 | Data bits DI 0 / DI 1 = dynamic code transmission |
| AS-i Input, Channel 2 | Data bits DI 2 / DI 3 = dynamic code transmission |
| AS-i Operating voltage AS-i maximum | 31.6 |
| AS-i Operating voltage, minimum | 26.5 |
| AS-i Outputs, DO 0 | Solenoid control |
| AS-i Outputs, DO 1 | For the variable setting of the latching force |
| AS-i Outputs, DO 2 | For the variable setting of the latching force |
| AS-i Outputs, DO 3 | For the variable setting of the latching force |
| AS-i Parameter bits, P0 | Actuator in |
| AS-i Parameter bits, P1 | Solenoid interlock locked |
| AS-i Parameter bits, P2 | Auxiliary voltage in |
| AS-i Parameter bits, P3 | Device error (fault detected) |
| AS-i Profile | S-7.B.F.E |
| AS-i Specification | Safety-Slave |
| AS-i Version | V 2.1 |
| AS-i, ID-Code | 0xB |
| AS-i, ID-Code1 | 0xF |
| AS-i, ID-Code2 | 0xE |
| AS-i, IO-Code | 0x7 |
| Active principle | inductive |
| Actuator monitored | Yes |
| Ambient temperature, maximum | 55 |
| Ambient temperature, minimum | -25 |
| Basic quantity unit | Piece |
| Certificates | cULus; EAC; ASi-SaW |
| Clamping force | 500 |
| Coding level according to ISO 14119 | Low |
| Control category to EN13849 | 4 |
| Degree of pollution to VDE 0100 | 3 |
| Duration of risk, maximum | 150 |
| EAN ( European Article Number) | 4030661370767 |
| EAN (European Article Number) | 4030661370767 |
| Enclosure material | Glass-fibre, reinforced thermoplastic |
| Fuse rating | 4 |
| Gross weight | 605.000 |
| Height of sensor | 179 |
| Included in delivery | Actuators must be ordered separately. |
| Integral System Diagnostics, status | Yes |
| Latching | Yes |
| Latching force, maximum | 100 |
| Latching force, minimum | 30 |
| Length of sensor | 40 |
| Mechanical life, minimum | 1000000 |
| Mission Time | 20 |
| Net weight | 605.000 |
| Note (AS-i Parameter bits) | Set the parameter outputs to "1111" (0xF) ; FID: periphery error |
| Note (AS-i Input module address) | Preset to address 0, can be changed through AS-interface bus master or hand-held programming device |
| Note (AS-i Operating voltage) | Protection against polarity reversal |
| Note (General) | Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.; As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
| Note (LED switching conditions display) | (1) LED green-red (AS-i Duo LED): Supply voltage / Communication error / Slave address = 0; (3) LED red: Internal device error; (2) LED yellow: Device condition |
| Note (Mechanical lifetime) | Operations for door weights ≤ 5 kg; Actuating speed < 0.5 m/s |
| Note (Relative humidity) | non-condensing; non-icing |
| Operating Current | 600 |
| Overvoltage category | III |
| Overvoltage category to VDE 0100 | 3 |
| PFH-value | 0.000000005 |
| PIN 1 | AS-i + |
| PIN 2 | Aux - (P) |
| PIN 3 | AS-Interface - |
| PIN 4 | Aux + (P) |
| Performance level, up to | e |
| Power to lock | Yes |
| Product group | Initial |
| Product name | MZM 100 AS |
| Product type description | MZM 100 B ST-AS REAP |
| Protection class (Operating resource) | 3 |
| Protection rating | III |
| Rated impulse withstand voltage | 0.8 |
| Rated insulation voltage | 32 VDC |
| Rated operating voltage | 24 VDC -15% / +10% (stabilised PELV) |
| Reaction time, maximum | 150 |
| Recommendation (actuator) | MZM 100-B1.1 |
| Relative humidity, maximum | 95 |
| Relative humidity, minimum | 30 |
| Resistance to vibrations to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm |
| Restistance to shock | 30 g / 11 ms |
| Safety Integrity Level (SIL), applicable for | 3 |
| Standards | IEC 61508; IEC 60947-5-3 |
| Storage and transport temperature, maximum | 85 |
| Storage and transport temperature, minimum | -25 |
| Terminal Connector | Connector plug M12, 4-pole, (A-coding) |
| Time to readiness, maximum | 4000 |
| Traceparts, external ID | 69-05102007-016632 |
| Traceparts, product ID | 69-05102007-016632 |
| Width of sensor | 40 |
| eCl@ss number, Version 9.0 | 27-27-26-03 |
| general information | Universal coding |
| Safety functions | Yes |
|---|
| Weight | 605 |
|---|
| protection class | IP 67 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
