| Ambient temperature, maximum | 55 |
|---|---|
| Ambient temperature, minimum | -25 |
| Automatic reset function | Yes |
| Basic quantity unit | Piece |
| Cable section, maximum | 2.5 mm² |
| Cable section, minimum | 0.2 mm² |
| Certificates | CCC; cULus; EAC |
| Climatic stress | EN 60068-2-78 |
| Common Cause Failure (CCF), minimum | 65 |
| Conduction resistance, maximum | 40 |
| Contact resistance, maximum | 0.1 |
| Control category to EN13849 | 3 |
| Current, Utilisation category DC12 | 0.1 |
| Current, Utilisation category DC13 | 2 |
| Degree of pollution to VDE 0110 | 2 |
| Diagnostic Coverage (DC) Level | 60 |
| Drop-out delay in case of "emergency stop", maximum | 20 |
| EAN (European Article Number) | 4250116202126 |
| EMC rating | EMC-Directive |
| Earth connection detection | Yes |
| Electrical power consumption | 1.7 |
| Electronic Fuse | Yes |
| Enclosure material | Glass-fibre reinforced thermoplastic, ventilated |
| Gross weight | 195.000 |
| Height | 126 |
| Indicated operating states | Position relay K3; Position relay K2; Position relay K1; Position relay K3 |
| Input resistance at GND | 2900 |
| Input resistance at Ue | 2900 |
| Input signal, HIGH Signal "1" | 19 - 28,8 VDC |
| Input signal, LOW Signal "0" | 0 - 1 VDC |
| Integral System Diagnostics, general | Yes |
| Mechanical life, minimum | 10000000 |
| Mission Time | 20 |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| Net weight | 195.000 |
| Note (Contact resistance) | in new state |
| Note (applications) | Safety sensor; Guard system; Emergency-Stop button; Pull-wire emergency stop switches |
| Notice | for max. 36,500 switching cycles/year and max. 60% contact load |
| Number of LEDs | 5 |
| Number of auxiliary contacts | 1 |
| Number of openers | 2 |
| Number of safety contacts | 2 |
| Overvoltage category | III |
| PFH-value | 0.0000002 |
| Performance level, up to | d |
| Product group | Initial |
| Product name | PROTECT-IE |
| Protection class of Clips or Terminals | IP20 |
| Protection class of the Clearance | IP20 |
| Protection class of the enclosure | IP20 |
| Pull-in delay at automatic start, maximum | 20 |
| Rated AC voltage for controls at DC minimum | 20.4 |
| Rated AC voltage for controls, 50 Hz, minimum | 20.4 |
| Rated AC voltage for controls, 60 Hz, minimum | 20.4 |
| Rated control voltage at AC 50 Hz, maximum | 26.4 |
| Rated control voltage at AC 60 Hz, maximum | 26.4 |
| Rated control voltage at DC, maximum | 28.8 |
| Rated impulse withstand voltage | 0.8 |
| Rated operating voltage | 24 VDC -15% / +20%, residual ripple max. 10 % |
| Resistance to vibrations to EN 60068-2-6 | 10...55 Hz, Amplitude 0.35 mm, ± 15 % |
| Restistance to shock | 30 g / 11 ms |
| Safety Integrity Level (SIL), applicable for | 2 |
| Short-circuit recognition | Yes |
| Standards | IEC 61508; EN 60947-5-1 |
| Storage and transport temperature, maximum | 85 |
| Storage and transport temperature, minimum | -40 |
| Switching capacity, maximum | 24 |
| Switching capacity, minimum | 10 |
| Terminal Connector | Cage clamps |
| Terminal designations | IEC/EN 60947-1 |
| Voltage, Utilisation category DC12 | 24 |
| Voltage, Utilisation category DC13 | 24 |
| Width | 48 |
| Wire breakage detection | Yes |
| eCl@ss number, Version 9.0 | 27-37-18-19 |
| Weight | 140 |
|---|
| depth | 61 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
