PROTECT-PE-11-SK

Descriere

Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
2 safety contacts
Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
2 safety contacts
Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)

Caracteristici

Ambient temperature, maximum	55
Ambient temperature, minimum	-25
Automatic reset function	Yes
Basic quantity unit	Piece
Cable section, maximum	1.5 mm²
Cable section, minimum	0.14 mm²
Certificates	CCC; cULus; EAC
Climatic stress	EN 60068-2-78
Common Cause Failure (CCF), minimum	65
Conduction resistance, maximum	40
Contact resistance, maximum	0.1
Control category to EN13849	3
Current, Utilisation category DC12	0.1
Current, Utilisation category DC13	2
Degree of pollution to VDE 0110	2
Diagnostic Coverage (DC) Level	60
Drop-out delay in case of "emergency stop", maximum	10
Drop-out delay in case of power failure, maximum	60
EMC rating	EMC-Directive
Earth connection detection	Yes
Electrical power consumption	1.7
Electronic Fuse	Yes
Enclosure material	Glass-fibre reinforced thermoplastic, ventilated
Gross weight	160.000
Height	126
Indicated operating states	Position relay K3; Position relay K2; Position relay K1; Internal operating voltage U<sub>i</sub>; Position relay K3
Input resistance at GND	2900
Input resistance at Ue	2900
Input signal, HIGH Signal "1"	19 - 28,8 VDC
Input signal, LOW Signal "0"	0 - 1 VDC
Integral System Diagnostics, general	Yes
Mechanical life, minimum	10000000
Mission Time	20
Mounting	Snaps onto standard DIN rail to EN 60715
Net weight	160.000
Note (Contact resistance)	in new state
Note (applications)	Safety sensor; Guard system; Emergency-Stop button; Pull-wire emergency stop switches; Safety light curtain
Number of LEDs	6
Number of auxiliary contacts	2; 9
Number of openers	1
Number of shutters	1
Number of signalling outputs	7
Overvoltage category	III
PFH-value	0.0000002
Performance level, up to	d
Product group	Initial
Product name	PROTECT-PE
Protection class of Clips or Terminals	IP20
Protection class of the Clearance	IP20
Protection class of the enclosure	IP20
Pull-in delay at automatic start, maximum, typically	10
Rated AC voltage for controls at DC minimum	21.1
Rated AC voltage for controls, 50 Hz, minimum	21.1
Rated AC voltage for controls, 60 Hz, minimum	21.1
Rated control voltage at AC 50 Hz, maximum	26.4
Rated control voltage at AC 60 Hz, maximum	26.4
Rated control voltage at DC, maximum	28.8
Rated impulse withstand voltage	4
Rated operating voltage	24 VDC -15% / +20%, residual ripple max. 10 %
Removable Terminals	Yes
Resistance to vibrations to EN 60068-2-6	10...55 Hz, Amplitude 0.35 mm, ± 15 %
Restistance to shock	30 g / 11 ms
Safety Integrity Level (SIL), applicable for	2
Short-circuit recognition	Yes
Standards	IEC 61508; EN 60947-5-1
Storage and transport temperature, maximum	85
Storage and transport temperature, minimum	-40
Switching capacity, maximum	24
Switching capacity, minimum	10
Terminal Connector	Screw connection, plug-in
Terminal designations	IEC/EN 60947-1
Tightening torque of Clips	0.6
Voltage, Utilisation category DC12	24
Voltage, Utilisation category DC13	24
Width	65.5
Wire breakage detection	Yes
eCl@ss number, Version 9.0	27-37-18-19