Descriere
- STOP 0 / 1 Function
- 1 oder 2-channel control
- 3 safety contacts STOP 0
- 2 Safety outputs STOP 1
- Drop-out delay 0 … 30
Caracteristici
| Ambient temperature, maximum | 60 |
|---|---|
| Ambient temperature, minimum | -25 |
| Automatic reset function | Yes |
| Basic quantity unit | Piece |
| Cable section, maximum | 2.5 mm² |
| Cable section, minimum | 0.25 mm² |
| Certificates | CCC; cULus; TÜV; EAC |
| Common Cause Failure (CCF), minimum | 65 |
| Conduction resistance, maximum | 40 |
| Contact resistance, maximum | 0.1 |
| Control category to EN13849 | 4 |
| Current leakage | 1 |
| Current, Utilisation category DC12 | 2 |
| Current, Utilisation category DC13 | 2 |
| Current, Utilisation category, AC15 | 4 |
| Current, Utilisation category, DC13 | 4 |
| Degree of pollution to IEC/EN 60664-1 | 2 |
| Diagnostic Coverage (DC) Level | ≥ 99 |
| Drop-out delay in case of emergency, typically | 10 |
| Drop-out delay in case of power failure, typically | 10 |
| EAN (European Article Number) | 4030661478517 |
| EMC rating | EMC-Directive |
| EPLAN | Yes |
| Earth connection detection | Yes |
| Electrical power consumption | 3 |
| Enclosure material | Glass-fibre reinforced thermoplastic, ventilated |
| Feedback circuit | Yes |
| Gross weight | 180.000 |
| Height | 98 |
| Integral System Diagnostics, error code | Yes |
| Integral System Diagnostics, status | Yes |
| Material of the contacts, electrical | Ag-Ni, self-cleaning, positive drive |
| Mechanical life, minimum | 10000000 |
| Mission Time | 20 |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| Net weight | 180.000 |
| Note (Contact resistance) | in new state |
| Note (applications) | Safety sensor; Guard system; hinged safety guard; Emergency-Stop button; Pull-wire emergency stop switches; Safety light curtain; Safety light barriers |
| Number of LEDs | 6 |
| Number of Safety contacts, STOP 0 | 3 |
| Number of auxiliary contacts | 1 |
| Number of fail-safe outputs, Stop 1 | 2 |
| Number of openers | 2 |
| Number of shutters | 1 |
| Number of signalling outputs | 1 |
| Overvoltage category | III |
| PFD value | 0.000053 |
| PFH-value | 0.0000000125 |
| Performance level, up to | e |
| Product group | Initial |
| Product name | SRB-E-322ST |
| Product type description | SRB-E-322ST |
| Protection class of Clips or Terminals | IP20 |
| Protection class of the Clearance | IP54 |
| Protection class of the enclosure | IP40 |
| Pull-in delay at RESET, typically | 150 |
| Pull-in delay at automatic start, maximum, typically | 150 |
| Rated AC voltage for controls at DC minimum | 19.2 |
| Rated control voltage at DC, maximum | 28.8 |
| Rated impulse withstand voltage, relay output | 4 |
| Rated impulse withstand voltage, semiconductor output | 0.8 |
| Rated operating voltage | 24 VDC -20%/+20%, residual ripple max. 10% |
| Removable Terminals | Yes |
| Reset edge detection | Yes |
| Resistance to vibrations to EN 60068-2-6 | 10 ... 55 Hz, Amplitude 0.35 mm |
| Restistance to shock | 30 g / 11 ms |
| Safety Integrity Level (SIL), applicable for | 3 |
| Short-circuit recognition | Yes |
| Standards | ISO 13849-1; IEC 61508; IEC 62061 |
| Start input | Yes |
| Stop-Category | 0; 1 |
| Storage and transport temperature, maximum | 85 |
| Storage and transport temperature, minimum | -40 |
| Switching capacity, maximum | 24 |
| Switching capacity, minimum | 10 |
| Switching frequency, maximum | 0.3 |
| Terminal Connector | Screw connection, plug-in; rigid or flexible |
| Terminal designations | IEC/EN 60947-1 |
| Tightening torque of Clips | 0.5 |
| Traceparts | Yes |
| Voltage drop U<sub>d</sub>, maximum | 0.5 |
| Voltage, Utilisation category DC12 | 24 |
| Voltage, Utilisation category DC13 | 24 |
| Voltage, Utilisation category, AC15 | 230 |
| Voltage, Utilisation category, DC13 | 24 |
| Width | 22.5 |
| Wire breakage detection | Yes |
| eCl@ss number, Version 9.0 | 27-37-18-19 |
Housing
| Weight | 180 |
|---|
mechanical data
| depth | 115 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
