Descriere
- Preset counter with one preset
- Revolution counter
- Subtracting
- Display 4-digits
- With reset button
- Surface mount housing
Technical data - electrical ratings
| Preset setting | Press reset button and hold. Enter desired value in any order. Release reset button. |
|---|---|
| Trigger / end contact | At 0000: As momentary contact: Contact duration dependent on speed e.g. 100 ms, at 10000 rpm and 50 revolutions = 1 digit At 9999: As permanent contact, contact remains until reset. If no reset takes place, the contact switches back at 8999. |
| Trigger / precontact | Preset number as momentary contact. End contact as permanent contact |
| Switching voltage | 230 VAC / VDC |
| Output contact | Change-over contact |
| Switching current | 2 A |
| Switching capacity | 100 VA / 30 W |
| Spark extinguisher | Recommended for inductive load |
| Preset | 1 preset |
Technical data - mechanical design
| Function | Revolution counter with preset |
|---|---|
| Dimensions W x H x L | 60 x 62 x 68.5 mm |
| Display | White numbers on black |
| Number of digits | 4-digits |
| Digit height | 5,5 mm |
| Operating speed | ≤10000 rpm |
| Housing type | Surface mount housing |
| Mounting type | Surface mount housing |
| Ambient temperature | 0...+60 °C |
| Count mode | Subtracting in a rotational direction to be indicated, adding in reverse direction |
| Material | Housing: Hostaform POM, grey |
| Operating torque | ≤0,8 Nm (with 1 rev. = 1 count) ≤0,4 Nm (with 50 rev. = 1 count) |
| Reset | Manual by button to preset |
| Drive shaft | Both sides, ø4 mm |
| Housing colour | Grey |
| Measuring range | See part number |
| Weight approx. | 350 g |
| Connection | Cable 0.3 m, 3-pin Cable 1 m, 3-pin |
| Dimensions mounting plate | 60 x 62 mm 60 x 85 mm |
Data sheet
