Descriere
- Metal enclosure
- 4 Contacts
- 62 mm x 127 mm x 50 mm ( basic component)
- Switching points and contact function adjustable
- 3 cable entries M 20 x 1.5
Caracteristici
| Active principle | mechanical |
|---|---|
| Actuating angle | 20 |
| Actuating element | Plunger |
| Actuating speed, maximum | 1 |
| Actuating speed, minimum | 1 |
| Ambient temperature, maximum | 60 |
| Ambient temperature, minimum | -20 |
| Basic quantity unit | Piece |
| Cable section, maximum | 2.5 mm² |
| Cable section, minimum | 1.5 mm² |
| Contact opening | 2 x 1.5 mm |
| Diameter of the Plunger | 6 |
| EAN ( European Article Number) | 4030661267302 |
| Enclosure coating material | painted |
| Enclosure material | Light alloy die-casting |
| Gross weight | 440.000 |
| Height of sensor | 138 |
| Length of sensor | 50 |
| Material of the contacts, electrical | Silver |
| Max. fuse rating | 16 A gG D-fuse |
| Mechanical life, minimum | 10000000 |
| Net weight | 440.000 |
| Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
| Note (General) | Type of contact and switching points can be factory set to order.; Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch. |
| Number of shutters | 4 |
| Product group | Product group 1 |
| Product name | U 434 plunger S |
| Product type description | US 434Y-4S |
| Rated insulation voltage | 500 V |
| Slide form | Sphere |
| Standards | EN 60947-5-1 |
| Switching element | Normally open contact (NO) |
| Switching principle | Creep circuit element |
| Terminal Connector | Screw connection |
| Thermal test current | 16 |
| Traceparts, external ID | 69-15022006-958066 |
| Traceparts, product ID | 33-22052019-077731 |
| Width of sensor | 62 |
| Wire cross-section | 13 |
| eCl@ss number, Version 9.0 | 27-27-06-01 |
Housing
| Weight | 440 |
|---|
ambient conditions
| protection class | IP 65 to IEC/EN 60529 |
|---|
Documentația poate fi solicitată împreună cu produsul.
Desenele pot fi solicitate împreună cu produsul.
