Descriere
- Size ø58 mm
- Precise optical sensing
- Output signal level TTL
- Through hollow shaft, ø14 mm
- For cone clamping installation
- Max. 8192 pulses per revolution
- Operating temperature -30…+120 °C
- Detachable cable – tangential outlet
Technical data - electrical ratings
| Voltage supply | 5 VDC ±5 % |
|---|---|
| Consumption w/o load | ≤100 mA |
| Reverse polarity protection | Yes |
| Pulses per revolution | 100 … 8192 |
| Reference signal | Zero pulse, width 90° |
| Sensing method | Optical |
| Interference immunity | DIN EN 61000-6-2 |
| Emitted interference | DIN EN 61000-6-3 |
| Output signals | A, B, N + inverted |
| Output frequency | ≤300 kHz (TTL) |
| Output stages | TTL linedriver (short-circuit proof) |
Technical data - mechanical design
| Size (flange) | ø58 mm |
|---|---|
| Shaft type | ø14 mm (through hollow shaft) |
| Protection DIN EN 60529 | IP 54 |
| Operating speed | ≤6000 rpm |
| Starting torque | ≤0,015 Nm (+20 °C) |
| Material | Housing: aluminium Shaft: stainless steel |
| Operating temperature | -30...+120 °C |
| Relative humidity | 90 % non-condensing |
| Resistance | DIN EN 60068-2-6 Vibration 20 g, 60-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms |
| Weight approx. | 150 g |
| Connection | Board connector, 8-pin |
Data sheet
Declaration of conformity
Accesorii și produse asociate
- Cone spreader shaft ø10 mmMounting accessories
- Cone spreader shaft ø10 mm V1Mounting accessories
- Connection cable with crimp contacts, 0.2 mConnectors and cables
- Mounting kit 019Mounting accessories
- Connection cable with coupling FCI, 8-pin / wire end sleeves, 1 mConnectors and cables
- Connection cable with coupling FCI, 8-pin / wire end sleeves, 0.6 mConnectors and cables
- Cone spreader shaft ø14 mmMounting accessories
- Connection cable with coupling FCI, 8-pin / wire end sleeves, 3 mConnectors and cables
